ICC Spectro

CAPABILITIES

ISO/IEC 7816 Smart Card interface testing/terminal simulation

• According to ISO/IEC 7816
• Adjustable electrical and logical protocol and application parameters
• Simulation VCC, RST, CLK, I/O signals
  • Voltage range: -0.5 V ... 6.5 V (slew rate adjustable)
  • Accuracy up to ±10 mV
  • Signal rise/fall time:
    VCC: 1 μs … 16 ms
    RST: 10 ns … 16 ms
    CLK: 4 ns … 1 μs
    I/O: 10 ns … 10 μs
• ICC Sequencer: for developing customised ISO APDU sequences and measurements by using pre-defined templates
• Measurement of electrical signals
  • Voltage: -2 … +7 V, ± 15 mV (all ISO contacts)
  • Current at VCC (3 measurement ranges) accuracy up to ± 5 μA
  • Current at RST, CLK, I/O (2 measurement ranges each), accuracy up to ± 5 μA
  • Frequency: 0.1 - 20 MHz
  • Duty-cycle: 0.1 - 99.9 % (depending on frequency)
  • Input capacity < 30 pF

SWP/HCI Smart Card interface testing/

terminal simulation

• Supporting SWP according to ETSI TS 102 613
• Supporting HCI according to ETSI TS 102 622
• S1/S2-signal at C6 contact:
  • Digital parameters adjustable
  • S1 voltage high level (-0.5 V … 6.5 V) and slew rate adjustable
  • S2 trigger threshold value adjustable
  • Input capacity < 30 pF

IC-USB Smart Card interface testing/terminal simulation

• According to ETSI TS 102 600 requirements
• C4/C8 signal:
  • Digital parameters adjustable
  • Monitoring/measurement of digital states
  • Input capacity < 30 pF

Monitoring between terminal and Smart Card

(only with ICC Tracer, optional)

• ISO/IEC 7816 Monitoring
  • Provides a structured view of the terminal profile
• SWP/HCI Monitoring
  • Based on ETSI TS 102 613/ETSI TS 102 622 and proprietary SWP standard Inside Contactless
  • SHDCL
  • Contactless tunneling (CLT)
• IC-USB Monitoring
  • According to IC-USB (ETSI TS 102 600)
  • Monitor of bytes/frames/bus-states
• Display and analysis of communication on physical, protocol, transport and application layer in individual views for each interface
• Synchronisation between layer views
• Various on-the-fly protocol checks
• Summary View: showing synchronised high-level information in one compact all-protocol master view

TEST SUITES

ISO Test Cases

• ICC Spectro 3GPP TS 31.122 UICC/USIM conformance test cases containing diverse electrical, protocol and application test cases
• ICC Spectro 3GPP 51.017 SIM Test Bench
• ICC Spectro 3GPP ISIM Test Bench
• ICC Spectro 3GPP2 CSIM Test Bench
• ICC Spectro 3GPP2 C.S0049 RUIM Test Bench
• ICC Spectro Card Profile Test Bench

SWP/HCI Test Cases

• ICC Spectro ETSI TS 102 694-2 SWP Test Bench
• ICC Spectro ETSI TS 102 695-2 HCI Test Bench

Global Platform

• ICC Spectro Global Platform
  UICC Compliance Test Bench

FURTHER OPTIONS

Universal Telecom Translator

• Supports GSM, W-CDMA, LTE, CDMA2000 (incl. SIM/SAT, USIM/USAT, CSIM/CCAT and ISIM)

External I/O

• Interface for external I/O signals

Analog Scope

• Integrated 100 MHz digital storage oscilloscope
• Max. number of channels: 12 digital, 3 analogue
• Digital monitoring on all contacts and interfaces
• Analogue voltage measurements (res. ~2.5 mV) on contacts VCC, RST, CLK and I/O
• Quick measurements
  • Rise and fall times
  • Peak-to-Peak
  • Top/bottom
  • Duty cycles

COMPRION Offline Dongle

• USB dongle for working with ICC Spectro software without connected hardware

COMPRION MoVie

• Stand-alone viewing software for log-files traced with ICC Tracer

GENERAL FEATURES

• Supported Smart Card voltage:
• 1.2 V / 1.8 V / 3 V / 5 V
• Supported ISO/IEC 7816 protocols: T=0 and T=1
• Supported IC-USB modes: ICCD, Ethernet Emulation Module, Mass Storage
• Supported technologies: 2G, 3G, LTE
  (incl. SIM/SAT, USIM/USAT, CSIM/CCAT and ISIM)
• Firmware can be updated via USB interface
• Test Case API: allowing customised simulation actions

DIMENSIONS

• W x D x H: 275 x 280 x 70 mm
• Weight: 3.0 kg

SCOPE OF DELIVERY

• ICC Spectro
• ICC Spectro Software (CD-ROM)
• Flex Adapter types A-D (terminal connectors)
• Plug-In SIM Adapter (PISA)
• USB 2.0 cable
• AC Mains Adapter (100 - 240 V / 50 - 60 Hz, ±10 %) for DC power supply (24 V, 2.5 A)

HOST REQUIREMENTS *

• Processor operating frequency: min. 2 GHz (2 x 1.5 GHz dual core or more recommended)
• Hard disc: min. 50 MB
• RAM: min. 1 GB (1.5 GB recommended)
• USB Interface: min. USB 2.0 highspeed
• Supported OS: MS Windows XP, MS Windows Vista, MS Windows 7