SPECTRO 2

CAPABILITIES

ISO/IEC 7816 Smart Card interface testing/terminal simulation

• According to ISO/IEC 7816
• Adjustable logical protocol parameters
• Simulation VCC signal:
  • Voltage range: 0 ... 5V
  • Resolution: ~ 1.5 mV
  • Output current: max. 500 mA
• RST, CLK, I/O switchable to GND and VCC level
• ICC Sequencer: for developing customised ISO APDU sequences and measurements by using pre-defined templates
• Measurement of electrical signals
  • Voltage range all ISO contacts 0 V … 5 V
  • Current at VCC (2 measurement ranges) resolution up to 6 μA

SWP/HCI Smart Card interface testing/terminal simulation

• Supporting SWP according to ETSI TS 102 613
• Supporting HCI according to ETSI TS 102 622 S1/S2-signal at C6 contact:
  • Voltage measurement at S1: 0 … 5 V
  • Current measurement at S2: 0 … 2 mA
  • Digital parameters adjustable
  • S1 voltage high level adjustable

IC-USB Smart Card interface testing/terminal simulation

• According to ETSI TS 102 600 requirements
• C4/C8 signal:
  • Digital parameters adjustable
  • Monitoring/measurement of digital states

Monitoring between terminal and Smart Card (only with ICC Tracer, optional)

• ISO/IEC 7816 Monitoring
  • Provides a structured view of the terminal profile
• SWP/HCI Monitoring
  • Based on ETSI TS 102 613/ETSI TS 102 622 and proprietary SWP standard Inside Contactless
  • SHDCL
  • Contactless tunneling (CLT)
• IC-USB Monitoring
  • According to ETSI TS 102 600
  • Monitor of bytes/frames/bus-states
• Display and analysis of communication
• on physical, protocol, transport, and application layer in individual views for each interface
• Synchronisation between layer views
• Various on-the-fly protocol checks
• Summary View: showing synchronised high-level information in one compact all-protocol master view

TEST SUITES

ISO Test Cases

• Spectro 2 3GPP TS 31.122 UICC/USIM conformance test cases containing diverse electrical, protocol and application test cases
• Spectro 2 3GPP 51.017 SIM Test Bench
• Spectro 2 3GPP ISIM Test Bench

• Spectro 2 3GPP2 CSIM Test Bench

• Spectro 2 3GPP2 C.S0049 RUIM Test Bench

• Spectro 2 Card Profile Test Bench

SWP/HCI Test Cases

• Spectro 2 ETSI TS 102 694-2 SWP Test Bench
• Spectro 2 ETSI TS 102 695-2 HCI Test Bench

Global Platform

• Spectro 2 Global Platform
  UICC Compliance Test Bench

FURTHER OPTIONS

Universal Telecom Translator

• Supports GSM, W-CDMA, LTE, CDMA2000 (incl. SIM/SAT, USIM/USAT, CSIM/CCAT and ISIM )

NFC Synchronisation Package

• COMPRION SyncBus: enables the synchronisation with NFC testing devices CLT Move or CLT One

External I/O

• Interface for external I/O signals

• Integrated 50 MHz digital storage oscilloscope
• Max. number of channels: 16 digital, 2 analogue
• Analogue voltage measurements (res. ~1.8 mV) on contacts: VCC, RST, CLK, I/O and SWP (C6)
• Analogue current measurements on contacts VCC and SWP (C6)
• Digital monitoring on all contacts and interfaces
• Adjustable recording depth: 4 k - 16.7 M samples
• Quick measurements
  • Rise and fall times
  • Peak-to-Peak
  • Top/bottom
  • Duty cycles

COMPRION Offline Dongle

• USB dongle for working with Spectro 2 software without connected hardware

COMPRION MoVie

• Stand-alone viewing software for log-files recorded with ICC Tracer

GENERAL FEATURES

• Supported Smart Card voltage:
• 1.2 V / 1.8 V / 3 V / 5 V
• Supported ISO/IEC 7816 protocols: T=0 and T=1
• Supported IC-USB modes: ICCD, Ethernet Emulation Module, Mass Storage
• Supported technologies: 2G, 3G, LTE (incl. SIM/SAT, USIM/USAT, CSIM/CCAT and ISIM )
• Firmware updated automatically via USB interface
• Test Case API: allowing customised simulation actions

DIMENSIONS

• W x D x H: 180 x 180 x 48 mm
• Weight: 2.2 kg

SCOPE OF DELIVERY

• Spectro 2
• Spectro 2 Software (CD-ROM)
• Flex Adapter types A-D (terminal connectors)
• Plug-In SIM Adapter (PISA)
• USB 2.0 cable
• AC Mains Adapter (100 - 240 V / 50 - 60 Hz, ±10 %) for DC power supply (12 V, 2 A)

HOST REQUIREMENTS *

• Processor operating frequency: min. 2 GHz (2 x 1.5 GHz dual core or more recommended)
• RAM: min. 1 GB (1.5 GB or more recommended)
• Hard disc: min. 200 MB
• USB Interface: min. USB 2.0 highspeed
• Supported OS: MS Windows XP, MS Windows Vista, MS Windows 7