CAPABILITIESMonitoring and analysis of NFC dataflow- NFC Forum digital protocol and activity, LLCP
- NFC Forum application protocol: NDEF, RTD
- All NFC tag types
- ISO/IEC 14443 (A/B)
- ISO/IEC 18092
- Proprietary contactless protocols B‘ , MIFARE and FeliCa
- Synchronised visualisation of NFC and ISO/IEC 14443 protocol specific information displayed in
- Physical Layer View
- Protocol Layer View
- Application Layer View
- Logical Link Layer View
- Summary View
- Info View
- Timing measurements e.g.
- Frame delay time
- Frame waiting time
- Protocol compliance checks on-the-fly
- Search and filter within the different layer views
FURTHER OPTIONSNFC Synchronisation Package- COMPRION SyncBus: enables the synchronisation with contact based COMPRION devices (Move 2/Spectro 2/Prove 2)
Analog Scope- Integrated digital storage oscilloscope
- Visualisation of the waveform and the envelope signal
- Display of up to 4 digital channels
- Quick measurements
- Modulation index
- Waveform characteristics
- Frequency spectrum
- Fall/rise times
- Peak-to-peak
- Top/bottom
- Duty cycles
- Trigger capabilities
- Trigger out
- 2-stage trigger
- Configurable sample rate up to 4 x fc
- Record length up to 32 M samples
COMPRION MoVie- Viewing software for sharing log files traced with COMPRION monitoring products without need of connected hardware
|
|
GENERAL FEATURES- Monitoring of different different bit rates from 106 kbit/s up to 848 kbit/s
- Feedback dialogue for optimal antenna positioning
- Firmware updated automatically via USB interface
- 3 Monitoring antennas
- Type 01: ISO 10373 calibration coil, 1 turn, area 3018 mm², f(res) ca. 145 MHz
- Type 02: COMPRION coil, 5 turns, area 614 mm², f(res) ca. 30 MHz
- Type 03: COMPRION coil, 5 turns, area 3848 mm², f(res) ca. 28 MHz
- Time measurement performance:
- Resolution: 1 / (4 x f(c))
- Measurement units: etu, second
- Time-syncronisation interfaces
- High speed COMPRION SyncBus
- Trigger out: connection between Analog Scope and external oscilloscope (1 V signal level at 50 Ω)
- COMPRION Monitoring Remote Control: start/stop monitoring remotely
DIMENSIONS- W x D x H: 125 x 185 x 40 mm
- Weight: 0.9 kg
SCOPE OF DELIVERY- CLT Move
- CLT Move Software (CD-ROM)
- COMPRION MoVie
- 3 different types of antennas
- USB 2.0 cable
- AC Mains Adaptor (100 - 240 V / 50 - 60 Hz, ±10 %) for DC power supply (12 V, 1 A)
- Travel bag
HOST REQUIREMENTS*- Processor operating frequency: min. 2 GHz (2 x 1.5 GHz dual core or more recommended)
- RAM: min. 1 GB (1.5 GB or more recommended)
- Hard disc: min. 200 MB
- USB Interface: min. USB 2.0 highspeed
- Supported OS: MS Windows XP, MS Windows Vista, MS Windows 7
* Host is not part of the delivery CE/FCC approval class A: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. |