UT³ Platform

According to ETSI TS 102 613 (SWP),
and ETSI TS 102 622 (HCI)
Adjustable logical SWP/HCI protocol parameters
Error simulation
S1/S2-signal at C6 contact:
- Adjustable current value for S2
- Measurement of voltage (S1) and current (S2)
Advanced SWP test features
- Extended bit duration
- Support for selective reject s-frame (SREJ)
- HW analogue SWP testing

NFC Forum digital protocol and activity, LLCP
NFC Forum application protocol: NDEF, RTD
All NFC Forum tag types
ISO/IEC 14443 (A/B)
ISO/IEC 18092
Proprietary contactless protocols B', MIFARE and FeliCa
Display and analysis of protocol specific information in synchronised views: Physical, Protocol, Application, Logical Link, Summary and Info view
Search and filter within the different views
Generation of comprehensive reports
Various on-the-fly protocol checks
Decoding of carrier and subcarrier
Timing measurements of Frame Delay/Waiting Time
Monitoring of bit rates from 106 kbit/s up to 848 kbit/s

Supported Smart Card voltage:
1.2 V / 1.8 V / 3 V / 5 V
Supported ISO/IEC 7816 protocols: T=0, T=1
Supported IC-USB modes: ICCD, Ethernet Emulation Module, Mass Storage
NFC: Feedback dialogue for optimal antenna positioning
Time measurement performance:
- Resolution (contactless): up to (8fc)-1
- Resolution (contact based): 10 ns
Measurement units: etu, second, CLK cycles
Time-synchronisation interfaces
- High speed COMPRION SyncBus
- Trigger out: connection between Analog Scope and xternal oscilloscope (1 V signal level at 50 Ω)
COMPRION Monitoring Remote Control: start/stop monitoring remotely
PCD output
- Pmax 1W into 50 Ω impedance
- Frequency range 13.56 MHz ± 3.75 MHz
- Frequency resolution < 24 mHz
COMPRION Remote Simulation Server

Integrated digital storage oscilloscopes with configurable sample rate of up to 100 M samples/s in contact based operation, and up to 4fc in contactless operation mode
Detailed timing and value measurements
Analogue voltage measurements on contacts VCC, RST, CLK, I/O and SWP
Analogue current measurements on contacts VCC and SWP
2-stage cascading trigger definition
Retriggering: multiple recording of samples initiated by defined trigger condition
Configurable sample rate: Resolution per sample: up to 14 bit
Record length up to 32 M sample points in contactless and 256 G sample points in contact based operation mode

Analog Scope Viewer

Visualisation of the analogue signals (e.g. modulated carrier amplitude, envelope signal)
Display of up to 8 digital channels in contactless and up to 16 digital/2 analogue channels in contact based operation mode
Signal/frequency analysis
Quick measurements
- Modulation index
- Waveform characteristics
- Frequency spectrum
- Fall/rise times
- Peak-to-peak
- Top/bottom
- Duty cycles
- Overshoot, Undershoot
- Low Level, Mid Level, High Level

COMPRION MoVie

Viewing software for sharing log files traced with COMPRION monitoring products without need of connected hardware

NFC DC Measurement

Two measurement channels
- sample rate 100 MHz
- resolution 14 bit
- Input impedance: BNC 1MΩ/15pF; MCX 10 MΩ/10pF
- Input measurement range: ±2.50V up to ±25V
External Trigger input
Trigger out
LEDs to indicate active channel, selected input range, hardware status