This trace tool is your reliable and competent companion for testing the new technologies ISO/SWP/USB. As the ITł Move!, Move 2 is portable and therefore applicable for testing in the field.
| Technical/Functional Details |
| General features |
 |
Support of 1.2V, 1.8V, 3.0V and 5.0V Smart Cards |
|
Visualisation of physical, protocol and application layer |
| Monitoring capabilities |
|
ISO/IEC 7816 1-4 |
|
USB according to ETS TS 102 600 |
|
SWP according to ETSI TS 102 613 |
|
SWP proprietary standards (Inside Contactless) |
|
HCI according the ETSI TS 102 622 |
| Trigger Out |
|
Digital signal to trigger an external oscilloscope synchronised to the internal Analog Scope |
|
1V signal level at 50Ω |
| COMPRION Sync Bus |
|
lCOMPRION specific high speed bus for time-synchronisation between different products and protocols |
|
50Ω MCX-coaxial-system; daisy chain |
|
Summary view: all-protocol master view displays synchronised high-level information from all protocols in one display |
| Dimensions |
|
Dimensions (W x D x H) appr.: 185 x 125 x 40 mm |
|
Weight: 0,9 kg |
| Host requirements* |
|
OS: Windows 2000/XP/Vista |
|
USB-Interface: USB 2.0 |
|
RAM: min. 1GB |
|
Hard disc: min. 50MB |
|
Processor 2GHz or higher |
| Product options |
| ISO Monitoring (ISO/IEC 7816-3) |
|
Digital monitoring |
|
Timing measurement on bit and byte level with a resolution of 20ns |
| USB interface (TS 102 600) |
|
Digital monitoring of the transmitted bytes/frames/bus-state |
| SWP Interface (TS 102 613) |
|
HCI visualisation |
|
SHDLC |
|
SWP Packets |
|
Digital monitoring of bits |
| Integrated 50MHZ digital storage oscilloscope |
|
Analog voltage measurements on contacts: Vcc, RST, CLK and I/O and SWP (C6) |
|
Voltage measurement resolution: approx. 2.5mV |
|
Analog current measurements on contacts Vcc and SWP (C6) |
|
Current measurement resolution dependant on channel |
|
Digital monitoring on all contacts and interfaces |
|
Adjustable recording depth: 4k – 16.7M |
|
Analog Channels: max. 2 |
|
Digital channels: max. 16 |
|
Trigger output for external measurement equipment |
Move 2
